Validation of the Brazilian Version of the RMS Tactile Scale (B-RMS-TS)

Abstract This study aimed to validate the Brazilian version of the RMS Tactile Scale (B-RMS-TS) in children and adolescents with visual impairment. Ten visually impaired children and adolescents between 10 and 17 years old of an Educational Center for Visually Impaired People answered the verbalized Dental Anxiety Scale (DAS), and the DAS in Braille to evaluate their dental anxiety levels. B-RMS-TS construct validity was assessed by convergent and discriminant validity. Convergent validity was tested in two ways: Pearson's correlation between the B-RMS-TS and the overall anxiety question; Pearson's correlation between B-RMS-TS and verbalized DAS and DAS in Braille. B-RMS-TS reliability was measured by internal consistency (Cronbach's alfa and McDonald's omega) and test-retest reliability (ICC). B-RMS-TS was moderately correlated to the overall anxiety question (r=0.493;p=0.147). B-RMS-TS showed excellent correlation with verbalized DAS (r=0.971;p<0.001) and DAS in Braille (r=0.934;p<0.011). B-RMS-TS was able to discriminate dental anxiety levels between male and female (p=0.008). The B-RMS-TS demonstrated excellent reliability (Cronbach's alpha=0.661, McDonald's omega=0.700 and ICC=0.987; 95%CI=0.817-0.999). B-RMS-TS is valid and reliable to measure dental anxiety levels in Brazilian children and adolescents with visual impairment.

Resumo Este estudo objetivou validar a versão brasileira da escala tátil RMS (B-RMS-TS) em crianças e adolescentes com deficiência visual. Dez crianças e adolescentes deficientes visuais entre 10 e 17 anos de idade de um Centro Educacional para Pessoas Deficientes Visuais responderam a Dental Anxiety Scale (DAS) verbalizada, e a DAS em Braille para avaliar seus níveis de ansiedade odontológica. A validade de construto da B-RMS-TS foi avaliada pela validade convergente e discriminante. A validade convergente foi testada em duas maneiras: correlação de Pearson entre a B-RMS-TS e a questão geral de ansiedade; correlação de Pearson entre a B-RMS-TS e a DAS verbalizada e a DAS em Braille. A confiabilidade da B-RMS-TS foi mensurada pela consistência interna (alfa de Cronbach e ômega de McDonald).) e confiabilidade teste-reteste (CCI). A B-RMS-TS foi correlacionada moderadamente à questão geral de ansiedade (r=0,493;p=0,147). A B-RMS-TS mostrou correlação excelente com a DAS verbalizada (r=0,971;p<0,001) e com a DAS em Braille (r=0,934;p<0,011). A B-RMS-TS foi capaz de discriminar níveis de ansiedade odontológica entre meninos e meninas (p=0,008). A B-RMS-TS demonstrou confiabilidade excelente (alfa de Cronbach=0,661, ômega de McDonald=0,700 e CCI=0,987; 95%IC=0,817-0,999). A B-RMS-TS é válida e confiável para mensurar níveis de ansiedade odontológica em crianças e adolescentes brasileiros com deficiência visual.

Focus on periodontal engineering by 3D printing technology ­ a systematic review / Enfoque en la ingeniería periodontal mediante la tecnología de impresión 3D: una revisión sistemática

Three-dimensional (3D) bioprinting of cells is an emerging area of research but has not been explored yet in the context of periodontal tissue engineering. Objetive: This study reports on the optimization of the 3D bioprinting scaffolds and tissues used that could be applied clinically to seniors for the regenerative purpose to meet individual patient treatment needs. Material and Methods: We methodically explored the printability of various tissues (dentin pulp stem/progenitor cells, periodontal ligament stem/progenitor cells, alveolar bone stem/progenitor cells, advanced platelet-rich fibrin and injected platelet-rich fibrin) and scaffolds using 3D printers pertaining only to periodontal defects. The influence of different printing parameters with the help of scaffold to promote periodontal regeneration and to replace the lost structure has been evaluated. Results: This systematic evaluation enabled the selection of the most suited printing conditions for achieving high printing resolution, dimensional stability, and cell viability for 3D bioprinting of periodontal ligament cells. Conclusion: The optimized bioprinting system is the first step towards the reproducible manufacturing of cell laden, space maintaining scaffolds for the treatment of periodontal lesions.

La bioimpresión tridimensional (3D) de células es un área emergente de investigación, pero aún no se ha explorado en el contexto de la ingeniería de tejidos periodontales. Objetivo: Este estudio informa sobre la optimización de los tejidos y andamios de bioimpresión 3D utilizados que podrían aplicarse a personas mayores en el entorno clínico con fines regenerativos para satisfacer las necesidades de tratamiento de cada paciente. Material y Métodos: Exploramos metódicamente la capacidad de impresión de varios tejidos (células madre / progenitoras de la pulpa de dentina, células madre / progenitoras del ligamento periodontal, células madre / progenitoras de hueso alveolar, fibrina rica en plaquetas avanzada y fibrina rica en plaquetas inyectada) y andamios utilizando impresoras 3D que pertenecen solo a defectos periodontales. Se ha evaluado la influencia de diferentes parámetros de impresión con la ayuda de andamios para promover la regeneración periodontal y reemplazar la estructura perdida. Resultados: Esta evaluación sistemática permitió la selección de las condiciones de impresión más adecuadas para lograr una alta resolución de impresión, estabilidad dimensional y viabilidad celular para la bioimpresión 3D de células del ligamento periodontal. Conclusión: El sistema de bioimpresión optimizado es el primer paso hacia la fabricación reproducible de andamios de mantenimiento de espacio cargados de células para el tratamiento de lesiones periodontales

Assessment of alveolar bone level and furcation involvement in periodontal diseases using dental cone-beam computed tomography (CBCT): a systematic review / Avaliação do nível ósseo alveolar e envolvimento da furca em doenças periodontais usando a Tomografia computadorizada de feixe cônico odontológica: uma revisão sistemática

The advent of CBCT has contributed significantly to dental imaging. In the field of periodontics, CBCT provides a multi-planar view to assess the alveolar bone in three dimensions. This helps the dentist to make measurements at any location that could significantly improve periodontal diagnosis. Objective: The aim of this systematic review is to evaluate the accuracy of using CBCT in the assessment of alveolar bone level and furcation involvement in periodontal diseases. Material and Methods: PubMed, LILACS and Google Scholar databases were searched for literature related to the application of CBCT in periodontal diseases. Keywords used for the search were CBCT, furcation involvement, measurement and their synonyms. Results: Fifteen full-text English language research papers were eligible for the systematic review using the PRISMA guidelines. Conclusion: From the results of the systematic review it can be concluded that conebeam computed tomography imaging technique offers significantly reliable images of the furcation involvement and height of the alveolar bone. (AU)

O advento da Tomografia computadorizada de feixe cônico (TCFC) contribuiu significativamente para a imageologia. No campo da periodontia, a TCFC fornece uma visão multiplano para avaliar o osso alveolar em três dimensões. Isso ajuda o dentista a fazer medições em qualquer local que possa melhorar significativamente o diagnóstico periodontal. Objetivo: O objetivo desta revisão sistemática foi avaliar a precisão do uso da TCFC na avaliação do nível ósseo alveolar e do envolvimento da furca em doenças periodontais. Material e Métodos: As bases de dados PubMed, LILACS e Google Scholar foram pesquisadas na literatura relacionada à aplicação da TCFC em doenças periodontais. As palavras-chave utilizadas para a pesquisa foram TCFC, envolvimento da furca, mensuração e seus sinônimos. Resultados: Quinze trabalhos de pesquisa em inglês com texto completo foram elegíveis para a revisão sistemática usando as diretrizes do PRISMA. Conclusão: A partir dos resultados da revisão sistemática, pode-se concluir que a técnica de imagem por tomografia computadorizada de feixe cônico oferece imagens significativamente confiáveis do envolvimento da furca e da altura do osso alveolar.(AU)

A Newly Proposed Regression Equation for Mixed Dentition Analysis Using the Sum of the Width of Permanent Mandibular Central Incisors and Permanent Mandibular First Molars as a Predictor of Width of Unerupted Canine and Premolars

Objective: To determine linear regression equation to predict the mesiodistal widths of the permanent canines and premolars based on the sum of the widths of the two permanent mandibular first molars and two mandibular central incisors. Material and Methods: The sample consisted of 800 (400 males and 400 females) permanent dentition casts of Chhattisgarh population. Mesiodistal crown widths of teeth were measured with digital caliper. The correlation and linear regression equations between the calculated four teeth (two permanent mandibular first molars and two central incisors) and the canine-premolars segments of both the arches were developed. Results: No significant differences were found in right and left side of the arch. Sexual dimorphism was significant in teeth sizes with higher mesiodistal dimension in males. A good correlation values varying from 0.51 to 0.67 was found. New standardized regression equations were formulated for the prediction of the mesiodistal widths of unerupted canines and premolars for Chhattisgarh population. Conclusion: Calculating mesiodistal widths of unerupted canine and premolars with help of two permanent mandibular molars and two mandibular central incisors, which erupt early in the oral cavity, can be an alternative and best predictor for the mixed dentition analysis.

Application of e-learning in dental radiology education at undergraduate level ­a systematic review / Aplicação do e-learning no ensino de radiologia dentária em nível de graduação - uma revisão sistemática

With the increase in internet technology as well as the electronic content the web-based learning has become the desirable medium in the field of education. In medical, dental and allied health science education, the conventional method involves the use of textbooks, lectures, and images. But trends suggest that a change is poised in this field. Objective: the systematic review aims to evaluate the literature of studies about the application of the e-Learning methods in radiology education at the undergraduate level in comparison to conventional teaching-learning methods. Material and Methods: prominent scientific databases were searched for literature related to the application of e-Learning in undergraduate radiology education. The search keywords used for the search were- E-learning, dental radiology, oral radiology, undergraduate. English language full text of eligible article was systematically reviewed. Results: seven full text articles were obtained after scrutiny of the available literature. Most of the research work was carried out in the past decade and dental schools in different parts of the world. Almost all the studies showed that e-learning was as either equally effective or more effective when compared to conventional teaching in dental radiology. Conclusion: e-learning could be a suitable alternative to conventional teaching-learning method with significant improvement in student attitude and knowledge however, the influence of e-learning in improving the practical or clinical skills of dental radiography is still debatable (AU)

Com o aumento da tecnologia da Internet, como também o conteúdo eletrônico da aprendizagem baseada na web, estes tornaram-se um meio desejável no campo da Educação. Em ciências médicas, odontológicas e afins, o método convencional envolve o uso de livros didáticos, palestras e imagens. Mas tendências sugerem que há uma mudança nesse campo. Objetivos: esta revisão sistemática visa avaliar literatura de estudos sobre a aplicação de métodos de e-Learning no ensino de radiologia no nível de graduação em comparação com os métodos convencional de ensino-aprendizagem. Material e Métodos: bases de dados científicas importantes foram pesquisadas sobre literatura relacionada à aplicação do e-Learning na graduação em radiologia. As palavraschave usadas para a pesquisa foram: E-learning, radiologia dentária, radiologia oral, graduação. O texto completo do artigo elegível em inglês foi sistematicamente revisado. Resultados: sete textos completos foram obtidos após análise minuciosa da literatura. A maior parte dos trabalhos de pesquisa foi realizada na década passada em escolas de odontologia em diferentes partes do mundo. Quase todos os estudos mostraram que o e-learning era igualmente eficaz ou mais eficaz quando comparado ao ensino convencional em radiologia dentária. Conclusão: o e-learning pode ser uma alternativa adequada ao ensino-aprendizagem convencional, com melhoria significativa nas atitudes e conhecimentos aluno. No entanto, a influência de e-learning para melhorar as habilidades práticas ou clínicas da radiolog ia dentária ainda é discutível(AU)

A New Regression Equation Proposed For Mixed Dentition Analysis in Chhattisgarh, Central India Population

Objective: To develop and propose a new regression for mixed dentition analysis in Chhattisgarh, Central India population. Material and Methods: The permanent dentition dental casts of 800 (400 males and 400 females) Chhattisgarh subjects were selected. Digital caliper was used to measure the mesiodistal crown widths of teeth. The linear regression equations and correlation between four mandibular incisors and the canine-premolars segments of maxillary and mandibular arches were developed (modified Tanaka-Johnston equation) and proposed for Chhattisgarh population. Results: New standardized regression equations were formulated to predict the mesiodistal widths of unerupted canines and premolars especially for Chhattisgarh, Central India population. The equation in males for maxillary arch was Y = 11.90 + 0.39 (X) and for mandibular arch was Y = 12.23 + 0.36 (X). Similarly, the equation in females for maxillary arch was Y = 14.40 + 0.26 (X) and for mandibular arch was Y= 10.26 + 0.43 (X). A significant sexual dimorphism in teeth sizes was seen with higher mesio distal dimension in males in Chhattisgarh population. Conclusion: Sum of the mesiodistal diameter of permanent mandibular incisors can be used reliably to predict/estimate the sum of mesiodistal diameters of unerupted canines and premolars with the new regression equations.

Impaction of the maxillary central incisor associated with supernumerary tooth: Surgical and orthodontic treatment.

Impaction of maxillary permanent incisor is not a frequently case in dental practice, but its treatment is challenging because of its importance to facial esthetics. Supernumerary teeth are the main cause of impaction of upper incisor. Supernumerary teeth when present can cause both esthetic and pathologic problems. Supernumerary teeth in the maxillary midline are common. Early detection of such teeth is most important if complications are to be avoided. We report a case of 12 year old male with an impacted supernumerary tooth in the maxillary anterior region, which was interfering with the eruption of the permanent, left central incisor. The impacted supernumerary tooth was surgically removed. With the application of an orthodontic traction, impacted left maxillary central incisor was brought down to its proper position in the dental arch.

Peri Apical Endodontic Surgery - Two Year Follow Up: A Case Report.

The endodontic treatment of necrotic anterior teeth after trauma remains complicated because of divergent root walls, thin dentinal walls and frequent lesions. The surgical endodontic treatment of teeth are well documented which are characterized by necrosis and infection in the presence of older fibrous and extensive lesion. The purpose of this paper is to report a two year follow up of a twelve years old patient whose tooth was treated for periapical lesion of endodontic origin by surgical endodontic procedure.

Tooth fragment reattachment after late retrieval (three months) from the lower lip: case report / Colagem de fragmento dentário recuperado tardiamente (após três meses) do interior do lábio inferior: relato de caso

OBJECTIVE: To present and discuss a case of child who sustained a complicated crown fracture,with the lost portion of tooth embedded in his lower lip. RESULTS: Tooth fragment was surgicallyremoved and successfully reattached to the tooth using acid etch and dentin bonding resin technique.

OBJETIVO: Apresentar e discutir um caso de criança que sofreu fratura complicada de coroadentária, com parte do dente perdida e alojada no lábio inferior. RESULTADOS: O fragmentodentário foi cirurgicamente removido do lábio e colado, com sucesso, ao dente, utilizando-seataque ácido e cimentação com compósito.

Central plexiform ameeloblastoma with exophytic growth a rare case report with review of literature.

Ameloblastomas are predominantly benign, intra-osseous odontogenic tumors and mucosal involvement is a rare secondary phenomenon, occurring only after a long period of intra-osseous growth and bone expansion. This article presents a case report of an eleven year old male patient with a large plexiform ameloblastoma which invaded the soft tissues, presented as an exophytic growth in the mandibular anterior region with radiographic feature of a large unilocular radiolucenc y and displaced mandibular left central incisor. The management comprised of surgical removal of ameloblastoma under local anesthesia along with extraction of displaced mandibular left central incisor.